|
|
 |
 CEMENT
& MIXES
|
 The
specialties family of products provides a range of product
forms which offer a choice of materials to address a wide
range of application problems, such as resistance to hot
gas erosion, flame impingement, the ability to be formed
into special shapes and configurations, installation into
blind hot spots and hard-to-insulate areas. These products
also possess the advantages inherent with other Fiberfrax®
ceramic fiber insulating materials: high temperature resistance,
excellent insulating properties, thermal shock resistance,
chemical stability, and ease of installation.
|
VENEER
MORTAR
|
| Max. use Temp. / Grade °C |
1600
|
Density, kg/m3
(lbs/cuft) |
1750 (109)
|
| Applications |
For sticking veneer modules, repair work, sealing.
|
| Packaging |
40 kg. Pail |
FIXWOOL
FX
|
Fixwool FX is a silicate - based adhesive used for
adhering fibre products to cold refractory brickwork or steelwork.
it is best suited to thin products and die - cut pieces of
blanket, felt, paper and board. Fixwool FX is supplied as
liquid mix.
|
| Temperature Grade |
1300° C |
| Colour |
Light Cream |
Density, kg/m3
Wet
Dry |
1.96
1.8 |
| Green Strength |
Good |
| Fired Strength |
Good |
| Consumption |
1 Kg / M2 |
| Method of application |
Brush, Trowel |
| Shelf Life |
6 Months |
|
Chemical Analysis, Dry Wt. %
Al2O3
SiO2
Al2O3 + TiO2
Na2O + K2O
CaO + MgO
|
> 70
< 25
< 1
< 7
< 1
|
| Packaging |
40 kg Pail |
SEALCOAT
HT
|
The wet sprayable versions of Pumpable
products are seal Coar HT. Seal Coat HT (in conjunction
with an Extrusion Pump and a Seal-Coat Gun Nozzel) can be
wet sprayed onto ceramic fibre, other refractory linings
& metal to seal, coat, and provide hot face Insulation lining.
Seal Coat HT provides a tough insulating barrier against
heat, gas flow and in some cases metal penetration.
|
| Temperature Grade |
1400° C |
Linear Shrinkage,
% dry to
fired, 24 hrs. at : 1350° C |
2.0 Max. |
Density, kg/m3
Wet
Dry |
1250 - 1350
500 - 600 |
| % Solids Average |
40 |
|
Thermal Conductivity W / mk
at
250° C
550° C
800° C
1100° C
|
0.09
0.12
0.16
0.22
|
| Sprayability |
Good |
| Thickness of Coating |
1/2" To over 2" |
| Coverage (for 1/2"
Thick) |
16.5 Kg./M2 |
| Stricking |
Good |
| Shelf Life |
6 Months |
| Packaging |
25 kg Pail |
QF
180
|
Fiberfrax® QF™ Coating Cements contain
ceramic fibres blended with inorganic additives to provide
air setting refractory coatings or bonding agents. QF Coating
Cements dry to a hard surface which is highly resistant
to erosion and flame abrasion.
Typical Application:
- Mould lining adhesive for Fiberfrax paper used with
high purity metals & glass
- Oxidation barrier for aluminium dip tubes, cast iron
thermocouple tubes and galvanizing tanks
- Protective coating for molten aluminium distribution
systems and associated implements
- Electric insulation coating for core liners of induction
furnaces
- Infrared radiating surface for heating elements
- Internal coating for automotive exhaust pipes
|
| PHYSICAL PROPERTIES |
|
| Colour |
Off – White |
| Form |
Paint |
| Wet Density |
1.54 gm/cc |
|
Solids Content
|
60% |
| Normal Layer Thickness |
0.25 – 0.5 mm |
| Typical Yield per 5.6 litres (1 layer) |
7 m2-14m2 |
| Application method |
Brush, Roller |
| Recommended temperature limit |
1250 Deg.C |
| Packaging |
20 Kgs/pail |
| Shelf Life |
Six months |
 Download
Product Specification (PDF file)
|
